Lets you know the Waveform Signals
Easy to Use Cable Fault Finder to Identify Cable Defects
The device will serve you find out the exact location of fault in underground cable, by calculating some factors like the direct signal received by the cable, the reflected signal received, the roughness of the signal, and more the fault location is been calculated. Thus, the top cable fault finder manufacturers SB Electrotech has created a top-class product that will leave no stone unturned in understanding the fault a cable can have at any point in time to its operation. Just use the cable break detector and you will identify all the issues with no discomfort.
Download Catalogue
View More
PRODUCT GALLERY
Eases Up the Cable Resistance Job
The underground cable fault locator from the best cable fault finder supplier product will help you find the fault location in cable and give a big productivity. Thus, you can save much more time in fault finding time with the help of cable fault finder.
Know More
CABLE FAULT PRE LOCATOR
- It can Test Distance, Speed and Resistance of the Cable.
- With Micro – Printer, print out the Wave form and measuring results.
- Fully Automatic Continuous Sampling, never misses any discharge web form.
- Test Method : Flash-over method, Low pressure pulse method, multiple waveform analysis method.
- Weight : 4.4 KG
- Resolution : 0.5 m
- Pulse Amplitude : 100 V p-p
- Pulse width : 0.1µS-2µS
- Data Storage : 10 Set.
- Relative Humidity : 90%
- Output Impedance :50 OHM
- Dynamic Range : >75db
- Power Supply : AC 220 V, +/- 10%, 50 Hz
- DC 24 V / 7 AH, CONT. For 6 Hours.
- Measuring Distance : 15 KM – 30 KM
- Accuracy of distance measurement : +/-1%
- Sampling and Impulse Current Method.
- Dimension : 350 mm X 280 mm X 170 mm
- Working Condition : Temp. : -10 deg. C – + 45 deg.
- Measuring method : TDR Measurement method, Flash-over
Know More
HIGH VOLTAGE SURGE GENERATOR
- With Over current, over voltage, over heat automatic protection.
- The impact discharge is uniform, and the discharge speed can be controlled.
- Short Circuit Protection function, can make the high voltage output directly to the ground.
- This device integrates DC-High Voltage Source, energy storage capacitor, discharge ball gap equal to one.
- Impact Time : 1 – 10 Sec.
- Impact Power : 400 Watt
- Built in Capacitor : 4 µF
- Surge Energy : 1225 J
- Weight : Less than 35 KG.
- Discharge Power : 2540 J
- Impact high Voltage : 0 – 35 KV
- Over temperature protection : 85 deg. C
- Dimension : 420 L X 325 W X 480 H
- Ambient Temperature : -20 deg. C to +50 deg. C
- Working Power : AC 220 V, +/- 10%, 50 Hz, +/-2 Hz.
- High Voltage Partial Pressure : Voltage Accuracy = 1.5
Know More
PIN POINTER
- Can synchronously receive sound and Electromagnetic wave, when fault point discharges.
- Structure Feature : receiver and probe separated. arm grade anti noise ear phone.
- The Probe is made of special technology with professional sound collector.
- Portable and easy to use. Fast and accurate to find cable fault.
- Positioning accuracy : +/-0.02
- Working Voltage : DC 9 V Battery.
- Receiving Frequency : Audio Frequency.
- Receiving Mode : Magnetic Sound Synchronization.
- Magnification : 50,000 times output impedance : 350 OHM.
- Power Operating temperature : – 10 deg. C – 55 deg. C.
- Power Dissipation : Quiescent current is less than 10 mA. The working current not more than 10 mA.
Know More
CABLE ROUTE TRACE
- Cable Route Tracer is specially designed for detecting the underground cable Layout position and underground depth in a certain range.
- Cable Route Tracer consist of Signal transmitter and receiver (Cable Fault pinpoint Tester), both of which finish the detection. By united operation the cable route detector could exactly pinpoint the cable route in the probable range of cable burial.
- Output Power : 100 W
- Output Current : 0 – 2 A
- Output Frequency : Audio Frequency.
- Output Signal : Intermittent , 0-50 V pp
- Power Supply : 220 V (1+/-10%), 50 Hz (1+/-5%)
- Receiving mode : Electromagnetic Induction