Reduce Labour Costs - Wind Coils Easily
Large Capacity Coil Winding
Robust vibration proof high quality steel frame work winding machine, Reduction gear box is fitted with radial slots face plate for holding the winding former.Electro magnetic brake with foot provided in this machine. Foot switch is pressed for running the machine the brake automatically open and the machine starts running and when the pressure on the foot switch is removed the brake automatically applied and stop the machine instantaneously. A five figure counter meter with zero re-set is provided with the machine. Motor, Magnetic Brake, Reversing Switch, Foot switch, Tail stock, Reel carrier, v - pulley, v - belts, safety guard of belt, belt tensioner, winding mandrel etc include in this machine., and detailed specifications are mentioned below.
Call Now: +91 94774-23085
View More
PRODUCT GALLERY
Reduced Labour Requirements
The transformer lv coil winding machine will work wonderfully if you wish to reduce the labour costs of your transformer, motors, and solenoids assembling unit. The machine will give you a stable operation and you can create various wire types.
The easy-to-install wires will let you have lower chances of failure because they run to add higher efficiencies. Just use this lv coil winding machine manufacturers in India product and grow your manufacturing work today!
| SPECIFICATION | LV- 200 | LV- 300 |
| Maximum coil diameter | 1000 mm | 1400 mm |
| Maximum distance between center | 1000 mm | 1400 mm |
| Winding speeds approximate | 16, 32, 64 r.p.m | 16, 32, 64 r.p.m |
| Diameter of face plate | 450 mm | 450 mm |
| Height of center over floor | 975 mm | 1000 mm |
| More taper tail stock | MT- 3 | MT- 4 |
| Load capacity between center | 400 Kgs. | 800 Kgs. |
| Motor H.P. / K.W. / R.P.M. / A.C. | 2/1.5/1440 | 3/2.2/1440 |
| Phase | Three | Three |
| Capacity | 16 KVA to 2 MVA | 16 KVA to 3 MVA |
| SPECIFICATION | LT- 500 | LT- 750 |
| Maximum coil diameter | 1500 mm | 1500 mm |
| Maximum distance between center | 1600 mm | 1800 mm |
| Winding speeds approximate | 8, 16, 32 r.p.m | 8, 16, 32 r.p.m |
| Diameter of face plate | 600 mm | 600 mm |
| Height of center over floor | 1000 mm | 1000 mm |
| More taper tail stock | MT- 4 | MT- 5 |
| Load capacity between center | 1500 Kgs. | 2500 Kgs. |
| Motor H.P. / K.W. / R.P.M. / A.C. | 5/3.7/1440 | 7.5/5.5/1440 |
| Phase | Three | Three |
| Capacity | up to 5 MVA | up to 10 MVA |
| SPECIFICATION | L.T. – 1000 | L.T – 1500 |
| Maximum coil diameter | 1650 mm | 1650 mm |
| Maximum distance between center | 2500 mm | 3000 mm |
| Winding speeds approximate | 8, 16 & 32 r.p.m | 8, 16 & 32 r.p.m |
| Diameter of face plate | 750 mm | 750 mm |
| Height of center over floor | 1000 mm | 1000 mm |
| Counter Meter | Mechanical | Mechanical |
| Output Side | Face Plate | =Face Plate |
| Support Side | MT-5 | MT-5 |
| Load capacity between center | 3000 Kgs. | 5000 Kgs. |
| Motor H.P. / R.P.M. / A.C. | 10 / 1440 / 3 P.H. | 10 / 1440 / 3 P.H. |
| Capacity | Upto 15 MVA | Upto 25 MVA |