Contact Info

Get A Quote

Underground Cable Fault Locator

Detects Cable Faults using All in One Underground Cable Fault Locator

Get All the Measurements on Screen

The device will find the fault in a cable so that you can fix it immediately and get back to your organizations’ operations. The underground cable fault detection tool by one of the leading underground cable fault locator manufacturers in India will simply show the details like test distance, speed, resistance of the cable etc on the screen. Gone are the days when you had the data on your machine, but nowadays, the device will give you a copy of what’s happening exactly in the device's unit. Finding the fault and printing it will keep data with you that’s going to benefit you with official use.

Download Catalogue
About Image
View More

PRODUCT GALLERY

Store Data of 10 Sets

Businesses have many requirements and the electrical cables they use can be many. The underground cable fault locator suppliers in India have created a product that will support you to store the data of 10 distinct cable lines so you can have the optimum flow and assessment of the current flowing in your devices and the cable lines. The product is so good that it will help you focus on the electrical circuits of your businesses and can help you gain maximum returns on your investments.. Try out the High voltage cable fault locator now to identify the defects in the cables of substations, buildings, malls, and more.

Know More

CABLE FAULT PRE LOCATOR

  • It can Test Distance, Speed and Resistance of the Cable.
  • With Micro – Printer, print out the Wave form and measuring results.
  • Fully Automatic Continuous Sampling, never misses any discharge web form.
  • Test Method : Flash-over method, Low pressure pulse method, multiple waveform analysis method.
  • Weight : 4.4 KG
  • Resolution : 0.5 m
  • Data Storage : 10 Set.
  • Relative Humidity : 90%
  • Pulse Amplitude : 100 V p-p
  • Pulse width : 0.1µS-2µS
  • Output Impedance :50 OHM
  • Dynamic Range : >75db
  • Power Supply : AC 220 V, +/- 10%, 50 Hz
  • DC 24 V / 7 AH, CONT. For 6 Hours.
  • Sampling and Impulse Current Method.
  • Measuring Distance : 15 KM – 30 KM
  • Accuracy of distance measurement : +/-1%
  • Dimension : 350 mm X 280 mm X 170 mm
  • Working Condition : Temp. : -10 deg. C – + 45 deg.
  • Measuring method : TDR Measurement method, Flash-over
Know More

HIGH VOLTAGE SURGE GENERATOR

  • This device integrates DC-High Voltage Source, energy storage capacitor, discharge ball gap equal to one. 
  • With Over current, over voltage, over heat automatic protection. 
  • The impact discharge is uniform, and the discharge speed can be controlled. 
  • Short Circuit Protection function, can make the high voltage output directly to the ground.
  •  Impact Time : 1 – 10 Sec. 
  • Impact Power : 400 Watt
  •  Built in Capacitor : 4 µF
  •  Surge Energy : 1225 J
  • Discharge Power : 2540 J
  •  Weight : Less than 35 KG.
  •  Impact high Voltage : 0 – 35 KV
  •  Over temperature protection : 85 deg. C
  •  Dimension : 420 L X 325 W X 480 H
  •  Ambient Temperature : -20 deg. C to +50 deg. C
  •  Working Power : AC 220 V, +/- 10%, 50 Hz, +/-2 Hz. 
  •  High Voltage Partial Pressure : Voltage Accuracy = 1.5
Know More

PIN POINTER

  • Portable and easy to use. Fast and accurate to find cable fault.
  • The Probe is made of special technology with professional sound collector.
  • Structure Feature : receiver and probe separated. arm grade anti noise ear phone.  
  •  Can synchronously receive sound and Electromagnetic wave, when fault point discharges. 
  • Receiving Mode : Magnetic Sound Synchronization. 
  • Receiving Frequency : Audio Frequency. 
  • Magnification : 50,000 times output impedance : 350 OHM. 
  • Positioning accuracy : +/-0.02
  •  Power Dissipation : Quiescent current is less than 10 mA. The working current not more than 10 mA. 
  • Working Voltage : DC 9 V Battery. 
  • Power Operating temperature : – 10 deg. C – 55 deg. C.
Know More

CABLE ROUTE TRACE

  •  Cable Route Tracer is specially designed for detecting the underground cable Layout position and underground depth in a certain range. 
  • Cable Route Tracer consist of Signal transmitter and receiver (Cable Fault pinpoint Tester), both of which finish the detection. By united operation the cable route detector could exactly pin point the cable route in the probable range of cable burial.
  •  Output Power : 100 W
  •  Output Current : 0 – 2 A
  • Output Frequency : Audio Frequency. 
  • Output Signal : Intermittent , 0-50 V pp
  •  Power Supply : 220 V (1+/-10%), 50 Hz (1+/-5%)
  •  Receiving mode : Electromagnetic Induction